airpods_pro_case_top_fastened
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The version of the top part of the case which can be used without adding any additional materials like glue or duct tape
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Airpods top part of the case with the ability to stick to the original case without any glue or duct tape. Though the ledge itself is kinda fragile (since it has to be very thin) it is still reliable if you are not to take it off the case.
Though putting the part on didn't affect my airpods original device case at all, I strongly recommend to use it with caution if you're too afraid to scratch your device.
It was tested on the eSun PLA+ 1.75mm and showed some promising results: like was mentioned earlier, the ledge appeared to be for one use only (I am not so cautios person) after the removal, but the part itself was fixed on the case pretty well.