1 / 7
wedge under filippi wings (klínek pod křídla filippi)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wedge for filippi boats for adjusting the height od oarlock.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (2)Powiązane
these are the wedges for filippi wing, somethimes you have to stack them, so I have double and triple versions,
Made version for sweeping carbon wings, it has a bigger shallow hole around holes.
best to print as 50% gyroid using CF PETG, normal PETG not tested, PLA will not work, and after prolonged period of time will flatten.
I only made it for one side, if you need it for other side just mirror it in slicer.