Kakashi Tanto - White Light Chakra Sabre

Kakashis' White Light Chakra Saber From Naruto Shippudden!!

I have not personally printed this blade as of yet, but i will as soon as i have room on my wall lol.

I designed it to be used for either a young Kakashi or Sakumo cosplay. They both wear different style straps when carrying it on their backs.

Technically this would be considered a short sword not a tanto due to the length, however I felt it looked better with the added length. If you disagree, just exclude the "Blade Middle" and "Scabbard Middle" from your build for a more accurate tanto.

These models are intended for the scabbard to be glued to the scabbard ring when assembling the sword. I've considered including a peg onto the scabbard so it could slip in and out through the ring. If you'd like to see that variation, let me know in the comments and i will include it with the files.

File Details:

• The scabbard hole is %13 larger than the blade itself. It should not fit too snugly in the scabbard. Paint could interfere with this if you intend to paint it.
• The scabbard has 2 - 4mm holes to fit 1/8" rods for easier assembly.
• The sword also has a 4mm hole in the core to help support the blade.
• The 4 holes on the Scabbard Plate are 6mm wide. If you intend to attach the Plate to a strap using bolts Id recommend having the bolt head to your back so it wont be uncomfortable to carry. Personally i would use superglue and EVA foam as the strap.
• Glue the Scabbard to the Scabbard Ring at the seam of the Scabbard Mouth and Middle. This will held Hide the seam.

***UPDATE 10/23/23

• The Handle 1 file was incorrect, it was missing the correct connection peg holes for both Handle 2 and the Blade End. I fixed the file so it should now have the correct connection holes, saved as Rev_1.

Size Details:

Overall Length (Blade in Sheath) : 644mm (25.35") Overall Width : 52mm (2.04") Sheath Length : 462mm (18.2") Sword Length: 588mm (23.14") Blade Length: 414.5mm (16.3") Handle Length: 184mm (7.25") Scabbard Plate: 115 x 115mm (4.5" x 4.5")

Print Settings

Printer:

FLSUN - QQS

Rafts:

Supports:

Infill:

Filament: Hatchbox and CC3D PLA Black and Silk Silver

Notes:

Category: Props