Enclosure for Hamamatsu C12702 APD Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This enclosure covers the APD and allows for mounting to optical tables.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
This enclosure covers the Avalanche Photodiode module and allows for mounting to optical tables and attachment of common optical filters and tubes.
This enclosure comes in 3 pieces:
Body A
Body B
Face
Print the Face at a high resolution (0.1mm works well). It's not critical on the other parts.
You will need (8) 4-40 Plastite screws for assembly:
https://www.mcmaster.com/99512A210/
(4) for mounting the board to Body A
(4) for mounting the face to the Body A and Body B combo.
For mounting to an optical table, you will need some heat set inserts similar to these:
8-32:
https://www.mcmaster.com/93365A142/
¼-20:
https://www.mcmaster.com/93365A160/
The front panel will accept Lens Filter Mounts that are threaded for 1.035-40
Here is one example part that fits:
https://www.thorlabs.com/thorproduct.cfm?partnumber=SM1QP