Webcam Mount Adapter for Dell AW2518 Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 3D printable adapter for securely mounting webcams on the Dell AW2518 monitor, which has a sloped, triangular t
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This adapter is designed specifically for the Dell Alienware AW2518 monitor, which features a uniquely shaped top frame that thickens toward the center in a triangular profile. Due to this shape, many webcams with standard clip mounts cannot stay level or stable.
This model provides a flat mounting surface that fits snugly over the monitor’s top edge, enabling secure placement of webcams like the Realsense D435 or similar devices.
The geometry accounts for the monitor's asymmetric thickness and provides enough surface area to stabilize most clip-based or bottom-mounted cameras.
Print Settings:
Material: PLA
Layer height: 0.2mm
Supports: Not required
Infill: 15%
Notes:
Tested with Dell AW2518H and AW2518HF monitors
May also fit other monitors with similar top profiles
