Stronger M2C Perfect Mesh adjustment bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple redesign of the M2C perfect mesh printed part that's very weak and will easily break.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Asked Avery to send me an STL. I wanted to redesign the part with strength in mind.
Sadly I was just asked to buy another one. $31+ for a couple grams of plastic that'll just break like the first one? No thanks. I hate greedy people.
So here's my design. would've been nice to have the dimensions without having to break out my calipers and partially disassemble my X-MAXX. I didn't get fancy…no fillets…just a strong part.
I used nylon and the bolt whole I just cut the threads by heating the bolt a bit and ghetto tapping. I tested it and should work for anyone that's using the M2C motor mount compatible with perfect mesh.
You can probably use any filament type with the way I designed it. I'd use 100% infill as it's only 8 grams give or take a gram.