“Shadow Whiskers” – Halloween Hueforge Print

🐾 “Shadow Whiskers” – Layered Halloween Hueforge Print 🌕

Introducing Shadow Whiskers, a hauntingly elegant Hueforge design from Manic 3D Prints. This layered Halloween STL features a sleek black cat perched on a gravestone beneath a looming full moon, surrounded by swaying grass, eerie clouds, and crooked crosses. The design evokes a perfect blend of mystery and vintage Halloween charm.

Rendered in striking tones of black, orange, and white with added moonlit depth, this piece prints beautifully with or without an AMS. Ideal for spooky decorative shelves, seasonal wall art, or Halloween gallery displays, Shadow Whiskers brings a touch of nocturnal magic to your haunted collection.

Project: Haunted Graveyard 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3 (Actual 3DHOJOR - PLA PRO - Black)
PLA BambuLab Basic Blue Gray Transmission Distance: 3 (Actual 3DHOJOR PLA Matte - Blue Grey)
PLA Kexcelled Orange Transmission Distance: 8 (Actual Sunlu - PLA Matte - Orange)
PLA BambuLab Basic Yellow Transmission Distance: 6 (Actual Eleegoo - PLA Matte - Sunshine Yellow)
PLA BambuLab Matte Ivory White Transmission Distance: 3.5 (Actual 3DHOJOR - PLA PRO - Cool White)
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray 
At layer #11 (0.96mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow
At layer #21 (1.76mm) swap to Ivory White for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween  Hueforge: Tales from All Hallows' Eve🎃

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.