1 / 6
Hose Flange for Printer Enclosure Fan Exhaust Tube — zdjęcie 1
1 / 6

Hose Flange for Printer Enclosure Fan Exhaust Tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hose Flange for connecting a 32 mm hose to an (e.g. printer) enclosure. A radial fan can optionally be mounted.

Ocena
0 / 5
Polubienia
4
Pobrania
18
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This flange can be used to connect a printer enclosure to an exhaust tube. I use a 32 mm pool hose. It is inexpensive, large enough, bends easily and has straight, unwaved parts, where it is easy to connect. 

Print with PETG. Print the upper parts with threads with the 0.15 mm layer thickness or less. Cut the tube at the position marked in the instructive image. Best use a fast-spinning circular saw for cutting. Inserting the tube into the fitting requires some force, but then it holds without glueing. Do not forget to slip the nut over the tube before inserting the tube into the fitting. You can optionally use a 36 x 2 mm rubber sealing ring (inner diameter = 34 mm, outer diameter = 38mm). The ring should fit by itself. It can optionally be glued. Use 4 mm screws to attach to the housing. The flange can be attached to the housing with screws. 

Alternatively, the fan holder can be used as counterpart for the flange, mounting the flange with M4 screws. The fan holder is designed for a housing plate thickness of 6 mm. Print the fan holder with a layer thickness of 0.25 mm. Insert M4 square nuts during the print. Optionally mount an axial 40 mm fan like e.g.  Sunon EE40201S3.  

Tagi