VFR800 Oiler Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6th Gen Honda VFR800 2002 - 2012. Mount to route an oiling tube to the chain.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Suitable for the Honda VFR800 6th Gen, from 2002 to 2012.
It may suit other models, but I've only got a 6th gen to test on.
Used with automatic chain oiling systems to lubricate the chain slowly as you ride.
Proper chain maintenance extends their lifespan considerably.
This piece bolts between an existing bolt and the chain guard of a Honda VFR800, and allows the commonly used 4mm oiler tube to pass through to drip above the chain.
I use a Cobrra Nemo 2, but any oiler would work if the tube can get the liquid.
It has lasted me 50,000km quite happily.
## 3D printing settings
Printed without support on a Creality CR10.
eSUN PLA+
0.4 Extruder
Infill to your liking, I used 10% gyroid but it's small enough it could be solid.