1 / 4
Lego Speed Champions F1 Wall Mount_Display
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount for the Lego speed champions F1 cars, please note I have only tested this on the red bull car
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 1208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
Split the model into parts so that you can print all the parts individually, tried my best to remove any excess bulk. My parts all ended up being press fit but this will all depend on your print settings etc. There are two 4mm holes to wall mount, could look good if you had a few next to each other :)
!!The model is designed to be split into objects, its not designed to print in place!!