LEGO Airbus Helicopter Wall mount (left side)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the holder for the LEGO Airbus Helicopter for free and without Supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the holder for the LEGO Airbus Helicopter.
Item number: 42145.
It can be printed with 15% infill, which is very stable. However, you can print it with a higher infill percentage. I would print the holder using either PLA or PETG.
You will also need to remove the rotor blade facing the wall. No supports are required.
This holder is compatible with the “Light my Bricks LED light set for LEGO 42145 Airbus H175 rescue helicopter”. In this case, however, you must not leave the lower circuit board of the set attached. (See picture.)
Additionally, the helicopter can only be placed in one direction. The holder is inclined slightly in this direction, making it look as if the helicopter is flying.
In one version, the helicopter looks to the right; in the other, it looks to the left. This allows you to decide which direction you want to mount it in.
If you have any questions, please contact me.