Print-in-place and articulated F14 with Camo - IDEX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IDEX/Multimaterial version of the print-in-place F14 Jet Fighter
- Ocena
- 4,714 / 5
- Polubienia
- 375
- Pobrania
- 814
- Wydruki
- 6
- Wyświetlenia
- 7651
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
IDEX/Multimaterial version.
Single extruder version: https://www.prusaprinters.org/prints/77500-print-in-place-and-articulated-f14-jet-fighter-wit
Stand: https://www.prusaprinters.org/prints/59711-print-in-place-and-articulated-f14-jet-fighter-wit
Print-in-place and articulated Jet Fighter for IDEX or Multimaterial 3d printers. The body with camopattern (color_01 and color_02) was printed as one part on a IDEX 3d printer while the canopy (canopy_separate) was printed separately and glued in place. If you have more than two colors you will be able to add the canopy (color_03) as a part of the multimaterial print. The wingtips has integrated supports and snaps of: https://youtube.com/shorts/SNWnS3XnjX8
Subscribe or follow me on:
Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz
Printsettings:
IDEX 3d printer or Multimaterial
No support
No raft
0,15mm-0,2mm layer height
35-45mm/s
*The print in the photo was printed slightly upscaled
WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license