Dragonburner mount for mgn12h on Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount allowing the Dragonburner toolhead to be fixed directly to mgn12h linear rail, with belt attachments
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Print face down using supports. Model uses two heated inserts to fasten the toolhead. Belt is reversed and fastens at the top of the gantry. This requires you to reverse the direction (invert) of the stepper motor. The belt length is longer than stock so you'll need a new belt if you choose to use this. It's easiest to thread the belts through the holes before fastening the mount to the carriage. The belt can de fixed with zip ties or clamps.
The factory endstop position can be used, and will be triggered by the carriage, but you will have to set the origin point to -25. This actually works out well with a side mounted nozzle scrubber. Make sure your probe offsets and min, max are set properly so the probe will hit the bed.