Giant Crocodile 50mm & 100mm (DND / TTRPG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A giant crocodile for DND and other TTRPGs
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
Going through models for Storm Lord's Wrath I found that it calls for a Crocodile and Giant Crocodile but I couldn't fine any of these available so I've made this one.
This followed my usual process but I had to do a fair amount of rigging and sculpting to get this critter into the right position.
I've made a few size variants here a 50mm x 25mm large version and a 100mm x 50mm giant version.
I'm might work on another variant that has sharp teeth and claws but idk if I want to stray too far from something that is FDM friendly. In my experience the upper/lower jaw stuff can be a pain to clean out. Speaking of - I would print this straight up on FDM and auto supports with resin. I wouldn't print with a baseplate but as usual for my test print I will.
Category: Games