Interlocking Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop interlocking drawers with storage volume of 210 mm x 160 mm x 60 mm.
- Ocena
- 0 / 5
- Polubienia
- 88
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 957
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Interlocking and stackable drawers. Storage volume of 210 mm x 160 mm x 60 mm.
Interlocking beams used to connect drawers. A hammer may be needed to insert beams the full depth.
These drawers were made to store my various 3D printing tools and assorted fastener kits.
Holes in the back of the drawer enclosures are needed to allow the air to enter/exit the drawer when opening and closing. The location/size of the holes can be tweaked to create an air cushion effect when closing the drawers.
Locations for ½" rubber bumper on the bottom of the enclosure.
Don't mind the colours! I was using up my half used or old spools! However the teal and grey is my favourite combo.
Feel free to remix the models.