Cosair Magnetic Cap for TITAN AIO cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic cap and base made so you can easily edit and make your own without much CAD knowledge made for easy printing
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted to make something that would help people with very little cad skills to still be able to print and customize with their own designs. I want it to be easy to print without supports and easy for them to add their own logo etc. with a simple shape cut or go 3d dimension and print holes side down.
Shouldn't need supports. Just need one FINAL base and any/all of the caps
Uses 8 6mm x 3mm magnets but could probably get away with 4.
Edit: Added more caps and made a v2 of the base with just slightly bigger holes. First version needed a little sanding to get so made it a little bigger.
Edit 2: Ok I have added FINAL versions of the base and blank cap. I corrected a minor flaw of the holes not being perfectly off set when I enlarged the holes. The original worked perfectly fine but the finals are best.