Low profile mounting bracket for Tekonsha P3 Trailer Brake Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket to resolve clearance issues when installing brake controller in compartments with limited height.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this bracket file to resolve a clearance issue I was having when installing a Tekonsha P3 Trailer Brake Controller into a compartment in the dashboard of my PN96 97-04 Ford F-150. I have verified this bracket will allow installation of the P3 in this vehicle and only this vehicle, but it may fit other applications as well. The part is designed to be screwed to the plastic of an interior trim component. the brake controller mounts to the bracket by fitting the hemispherical nubs into the holes where the screws go for the Tekonsha-provided mounting bracket, and is similar to how the interchangeable plastic mounting bracket from Tekonsha attaches. With suitable settings and materials, this part is quite stiff and this has provided an adequately secure connection for my needs.
I suggest printing in PETG to prevent deformation during high temperatures and referencing the installation manual for your brake controller to verify the bracket is positioned correctly to ensure the Brake controller accelerometer will function correctly for a safe towing experience.
this part is “good enough” but there is room for improvement and adaptation.