Hypercube Front Bed Frame Alignment Bracket - Retro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked QuickBike's design for a HyperCube bed frame alignment bracket. He made it easy for me to add my retro name by…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I liked QuickBike's design for a HyperCube bed frame alignment bracket. He made it easy for me to add my retro name by supplying a blank bracket. I added the previously created "HyperCube" retro name and spun a new STL file. I printed this part with lots of support.
Printed in PLA at 200C
You must use support if you print with the current orientation.
4-21-2017 I posted a version V2 which has thicker end caps and is slightly taller to cover the extrusions better. Looks the same.
Here's how to create any type font name tag: http://www.thingiverse.com/thing:2294134
Here's my HyperCube: https://www.thingiverse.com/make:272257
Print Settings
Printer:
HyperCube
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
50%
Notes:
PLA at 200C
Bed off using glass with blue tape
Post-Printing
Remove all the supports and clean up as needed. My part was sanded with 400 grit sandpaper and painted with semi-gloss black paint.
Category: 3D Printer Parts