Mini Fogmachine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini fogmachine made from a vape head and an air pump
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
I was inspired by this upload on thingiverse https://www.thingiverse.com/thing:5345781 and this video on youtube
So I decided to make my own. Make it a bit slicker and able to disconnect the battery from the fogmachine. There are also holes on the models so I can add some 10x3mm magnets for mounting.
Materials used:
Air pump:
https://www.amazon.de/dp/B0DF35RR61
Vape head:
Search for Kangertech T2 Clearomizer
I used a PVC tube but silicone is probably better with all the hot glue(6mm inside diameter, 8mm the whole tube)
Battery:
BAK N18650CK 3000mAh 3,6V - 6.1A Li-Ion
Switch:
https://de.aliexpress.com/item/1005008240172825.html
Battery Terminals:
Any will do. I used these
https://de.aliexpress.com/item/1005007394265670.html
A pair of 2.5mm JST-SM connectors or any other connectors to connect/disconnect the battery pack.
Fog Liquid:
The fog liquid is made out of 80% vegetable glycerine and 20% propylene glycol.
Some Hot glue, solder and a old usb cable I had lying around.
I used this video to help me with the soldering:
I also used a cooling mouthpiece from our hooka an a piece from a silicone hose to make the fog fall to the ground.
