1 / 2
Hairdryer Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a Hairdryer which can be mounted to a piece of furniture via press-fit
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for a hairdryer which can be mounted to a piece of furniture via press-fit.
Especially designed for:
- Philips EssentialCare BHC010
- IKEA SUNDVIK
It should work with most hairdryers and all furniture with an 18mm wide board to clamp to.
If you want to customize the model for your specific hairdryer or piece of furniture you can do so easily within Fusion360.
The model is parametrized and you can change the values to your specific situation:
| Parameter | Value |
| UpperDiameter | Measure the thicker upper diameter of your hairdryer (upper boundary of the holder) |
| LowerDiameter | Measure the thinner lower diameter of your hairdryer (lower boundary of the holder) |
| Height | The height difference between the two diameter mesurements |
| BoardThickness | The thickness of the board you want to attach the holder to. |
| BoardHeight | This value changes the height of the “clamp” attaching to the board. 3cm was more than enough for me. |