Full Main Dial for 2025 Heliochronometer Sundial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A complete 360 degree main dial for extending the reading hours of your 2025 heliochronometer sundial.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original 2025 heliochronometer sundial reads time between 5:30AM & 6:30PM. This is due to the crescent main dial which limits the mechanical movement of the alidade. The original design is available here: Accurate Heliochronometer Sundial 2025 by 3DMason | Download free STL model | Printables.com
Note: This design is only compatible in the NORTHERN HEMISPHERE. A SOUTHERN HEMISPHERE version can be downloaded here: Full Main Dial for 2025 Heliochronometer Sundial - Southern Hemisphere Version by 3DMason | Download free STL model | Printables.com
Change History
Update (24-10-25): The teeth on the main dial gear were re-aligned to better register with the noon mark. The original design was off by 1.25 degrees. Note that this has no impact on the reading accuracy of the dial itself since that is primarily determined by the alignment of the minute dial. The new file is named: Clock_Hybrid_Gard_Main_Dial_Gear_v2.stl
This new main dial design provides a complete 24 hour movement by incorporating the following modifications:
- A full circle main dial with 24 hour markings;
- A full Outer Ring Gear: i.e.
- 144 inner teeth vs. original 94;
- 144mm Pitch Dia. (same)
- Additional (2nd) Planetary Gear:
- 69 teeth;
- 69m Pitch Dia.
- Upgraded Dial/Latitude Crescent Support with extra arm.
Modifications 3 & 4 are optional, but will add to the overall rigidity of the sundial assembly when using the new full circle main dial.
Refer to the original design for assembly, setup & use: Accurate Heliochronometer Sundial 2025 by 3DMason | Download free STL model | Printables.com