Rope Pull Handle - Pull Start Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently installed an attic pull down ladder which came with a small cheap handle to pull the ladder down. I…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 214
- Wydruki
- 3
- Wyświetlenia
- 1140
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I recently installed an attic pull down ladder which came with a small cheap handle to pull the ladder down. I designed this beefier pull handle. The rope for the ladder feeds through the middle of the handle and is tied into a knot which is trapped inside the tapered hole through the middle of the handle. This handle can be used for other rope pull applications such as the start handle for a lawn mower's gas engine or the pull handle on a pole type tree trimmer.
I suggest printing this handle in ABS at 50% density or better. It must be printed with supports in the orientation provided. I used para-cord for my rope. The hole is perfect for para-cord and a single knot fits inside the tapered hole in the handle. I suggest sealing the ends of the rope by heating it with a lighter to keep the rope from fraying.
Category: Replacement Parts