1 / 7
Replacement Plastic Chair feet for Square Metal Tubing — zdjęcie 1
1 / 7

Replacement Plastic Chair feet for Square Metal Tubing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These chair feet are designed to fit chairs legs that are made with 16 mm inside diameter square tubing. I've included…

Ocena
0 / 5
Polubienia
13
Pobrania
138
Wydruki
0
Wyświetlenia
612
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

These chair feet are designed to fit chairs legs that are made with 16 mm inside diameter square tubing. I've included three styles of feet. The foot with the rounded end will fit a leg at any angle. Each of the feet has a round recess that will accept a felt self stick pad available from Home Depot. I printed 20 of these pads in ABS for 5 chairs in my home.

I don't see any reason that these feet couldn't be resized for square tubing of different sizes.

Once printed, use a rubber mallet to pound the foot into the square tubing. Add the optional felt pad for a smoother gliding action.

I suggest printing in ABS, Nylon, or TPG for a soft flexible foot. PLA is probably too stiff and might crack.

Print Settings

Printer:

HyperCube

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

50%


Notes:

I suggest printing in ABS, Nylon, or TPG for a soft flexible foot.

Category: Replacement Parts

Tagi