1 / 2
Power Supply Case for Starlink (12V to 48/56V) V2 — zdjęcie 1
1 / 2

Power Supply Case for Starlink (12V to 48/56V) V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified power supply case with feet printed separately.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Friend of mine was having difficulty printing case for Starlink power supply. I did not like printing with 10mm of supports, so I cut the feet off so they could be printed separately. One version using M3 nuts in the feet one version with no nuts that is just under sized hole that M3 should thread directly into.