Universal toilet seat removal and installation tool for spanner and ratchet adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toilet seat removal and installation tool for spanner and ratchet adapter
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
I seem to own an obscure toilet which when the toilet seat broke made accessing and turning the thumb screws difficult. None of the standard toilet seat adapters seemed to fit so I made one.
The tool fits a variety of different handles shapes (I didn't know what mine was until I removed it). You can use a 3/8" drive ratchet or similar tool, or use a 22mm/32mm spanner (or a ratchet spanner for bonus points).
I'm not a plumber and only needed it to last one job so I printed with whatever was on the printer at the time (PLA) and guessed at the print settings. I removed two, not particularly tight, thumb screws with no signs or wear or damage. If you intend more frequent use I'd suggest a less brittle material.
Print with supports and a high infill (it makes little difference to print time)
