HyperCube Z Axis Limit Switch - 8 & 10 mm Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I upgraded my HyperCube Z axis to 10 mm bearing rods and decided to add a Z Axis limit switch. The stock mount is for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I upgraded my HyperCube Z axis to 10 mm bearing rods and decided to add a Z Axis limit switch. The stock mount is for the 8 mm bearing rods and requires that the mount slide over the bearing rod. This mount can be attached after the rods are in place. I made the 10 mm mount for my HyperCube and I have posted a version with an 8 mm hole for those that would like to use this mount on their 8 mm Z axis setups.
I added the Z axis adjustable end stop for convenience. There are no changes to this part which came from Tech2C's HyperCube design
Printed in ABS at 230C
Category: 3D Printer Parts