gasket to reinforce pool wall to skimmer connection surface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gasket to reinforce pool wall to skimmer connection surface between intex above ground pool and aftermarket skimmer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I bought skimmer from Aliexpress for above ground pools and it should be mounted on pool with hard sides. I have above ground pool with only linen and there was leak at the bottom of skimmer between rubber sealing and linen. This gasket is glued on outer side of pool by Threebond elastic glue and serve as wall reinforcement and also adding 1mm between rubber gaskets pushing them to better seal the connection.
It is printed in PETG 0.15mm layer with 6 perimeters to reinforce screw holes.
this is skimmer i have: