Newtonian Telescope (D150F750 mirror)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design for a 150mm diameter, 750mm focal length mirror telescope main body and key components.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This telescope project is still under development. Please read this description carefully before attempting to build it.
The assembly requires 4 aluminum or metal rods, each 750mm in length and 20mm in outer diameter, along with 24 M5 screws. Based on the visuals provided, you can begin assembling the main structure. However, the optical path is not yet finalized—precise optical calculations are still in progress. Before building, please perform your own calculations to ensure correct alignment and focus.
The eyepiece section is not included in the current design and will need to be fabricated by you. The focal length can be extended if desired, depending on your specific use case.
I also designed a custom adapter for a 40mm x 40mm tripod, which you can modify to fit your setup.
If you decide to build this project, avoid using PLA for the 3D-printed parts. For better durability and heat resistance, use ABS or PETG instead.
I’ll be sharing updated versions of this project soon, with improved designs and corrections to any current deficiencies. To stay informed, feel free to follow this account.
⚠ WARNING: This project is still in progress. Do not attempt to build it without reading the full description.