Corsair Capswap: Classic Corsair Pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, supportless, Capswap featuring Corsair's signature triangular pattern. Best printed in white PLA.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple Capswap with Corsair's triangular pattern, featured on their 480T, 3000D, 4000D, 5000D, and 7000D cases, as well as on many of their other products.
Printing tips:
- 30-45mm/sec bridging speed
- 100% infill
- White (or a similar light color of) PLA
- Aligned seams
The Capswap is best printed in white PLA as it is slightly translucent. In my experience, PETG is more translucent but is also slightly worse at overhangs and bridges. Printing slow (30-45mm/sec) for the bridges is ideal.
The Capswap shouldn't get hot enough to warp/melt PLA.
(If it does, you might need more powerful case fans :D )
I have used fuzzy skin (0.5mm point distance and 0.25mm thickness, contour only) to give the surface a slightly matte look and to hide the seams. A modifier should be added as shown or the fuzzy skin will affect the accuracy of the little clips.
Also works without the fuzzy skin and might be better without it depending on what look you want.
100% infill is also recommended so that you won't see the infill pattern when the light shines through.