Universal Peg Board DYMO LetraTag Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket used to mount an old-style DYMO LetraTag label maker, with storage for two additional rolls of tape.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Note: This print uses the mounting pegs and slots from the Universal Peg Board System by AimeBuilder. You will need two or three of AimeBuilder's pegs, which I've included in the files here as well.
This mounting bracket can be used in conjunction with the Universal Peg Board Peg System to mount an old-style DYMO LetraTag label maker and two cartridges of label tape to a standard pegboard.
It's a good way to store the label maker, which is a little awkwardly shaped and takes up too much space when stored horizontally on my workbench. As always, feel free to modify the files to match your own needs.
NOTE: Take a close look at the label maker shown in the included photos. I have no way of knowing if this designs fits the NEWER model LetraTag label makers. If someone cares to find out, please let me know and I will update the listing either way.
I printed my mounting bracket from PETG, hollow side facing down, with tree supports enabled to help with the bridging. I recommend between .1mm and .3mm layer height, 5% infill, and at least 3 wall perimeters for strength.