Bat System for Vevor 280mm Pottery Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WIP: Bat System for self cut square bats Bat size: 185mm x 185mm. Wheel diameter: 280mm For wheels without bat holder
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
My partners vevor pottery wheel doesn't have the option to use bats which use these standard mounting bolts. We tried some available 3d models which weren't really satisfying to use.
To save as much filament as possible and to fit the model on a 260 x 255 mm build plate I had some fun with geometrical shapes and only left 4 corners which are used to mount the system on the side of the wheel.
The holes on the side are designed for m4 heatset inserts. You can secure the system on the wheel with grub screws. Just tighten them as tight as necessary. You will still be able to remove it without loosening the grub screws, but the system shouldn't move or turn when the wheel is spinning.
The model was printed in PLA without top layers but two bottom layers to increase adhesion to the build plate.
The model is ready to use, but I have still some adjustments to make. I want to change to shape of the 4 holes in the side wall from round to tear shape to reduce sagging. Due to sagging it is quite likely that the heat set inserts won't fit initially without some rework. The tear shape usually fixes it but I didn't do it initially because I forgot how I did it with other models.
As bats we went to the hardware store and used the cut service.
The bats have the size: 185mm x 185mm.
We have seleted a material which is part resin and part wood (German: HPL-Platten (kurz für High Pressure Laminate)) which seems to be working without being damaged when trying to remove the thrown object.