Book Signature Punch for 8.5" x 11" Paper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This punch makes holes for sewing book signatures made from 8.5 x 11 inch paper.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
UPDATE: I would be willing to make some small modifications to this model if they would be helpful. I could easily adjust the number or position of holes or the length of the model if someone would use it. I designed this for a specific purpose for a friend. I did not truly expect that anyone would download the model from Printables and have been pleasantly surprised that a few people have. Please reach out if you would like me to consider making some small changes.
This is a punch for making holes for sewing book signatures from 8.5 x 11 inch paper. The punch is in three parts: 1) A base that holds the paper signature and has holes to receive the nails that will do the punching; 2) a nail holder through which you can insert 1" nails with flat heads; 3) a handle that slides on to hold the nails in place and provides a good place to hold.
The design currently includes two different hole arrangements:
6 Holes with three pairs equally spaced around the center.
8 Holes with 4 pairs spaced 1.25" apart arranged around the center with 0.5" between the pairs. The first hole is 1 inch from each end. Specifically the holes are at 1", 2.25", 2.75", 4", 4.5", 5.75" 6.25" and 7.5".
Printing the pieces in their default orientation should not require any supports. Add a brim if you have doubts about bed adhesion.