K1 | K1C | K1Max - PU4 coupler bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces bracket that couples PTFE to stock filament sensor. Use if you have removed the sensor. Fits riser V3
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Remixed the stock K1 series PTFE coupler bracket to suit a PU4 coupler. This is useful if you have removed the stock filament sensor (e.g. have a DXC extruder, etc.) and want to simplify your filament path.
PU4 coupler shown will fit - cheap on aliexpress/amazon - but be aware there appear to be several different models with slight size differences which may not fit.
Comes in two sizes:
- Stock matching the dimensions of the stock model
- +3mm to match the Leote Lid Riser V3/V3.2 application with 3mm spacers (Pictured) (https://www.printables.com/model/951012-creality-k1-k1c-k1se-lid-riser-v3-frame-extension)
I recommend printing in orientation as provided/shown in STL picture. You probably dont need supports unless you have fan speed turned right down…
Print 1x Part_A and 1x Part_B of your desired size.
Pictured: +3mm version printed in black ASA GF, Normal version printed in eSun PLA+ Bone white (dont print this in PLA for use, this was for testing - use something more heat resistant)