1 / 3
Automatic Baby Bouncer Motor for Baby Delight Baby Bouncer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Automatic bouncer for Baby Delight Bouncer. Original design by
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
This model uses the following parts:
Parts
Heatset Inserts
- 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp)
- 1 4x5x4 Heat-set Insert (For screw that tightens cam to motor shaft)
Screws
- 1 M3 x 40mm Socket Head Cap Screw (To secure axle to cam)
- 6 M3 x 16mm Socket Head Cap Screws (To secure motor to housing)
- 6 M3 x 8mm Socket Head Cap Screws (4 to secure front panel, 2 to secure bouncer clamp)
- 4 M3 x 10mm Socket Head Cap Screws (To secure bottom plate to motor housing)
- 1 M4x4mm Socket Head Cap Screw (To tighten cam to motor shaft)
Prints with very minimal supports (just for screw holes). Feel free to reach out with any questions.