DIY Photography Softbox for LED Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project uses 3D-printed brackets to create a lightweight but sturdy frame for a DIY softbox
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
My "Zero-Budget" Softbox for Professional Photos
I recently invested in some basic equipment to improve my product photography for my MakerWorld and Printables models. While the LED light panel I got is bright, the light was too harsh and created strong reflections.
Professional softboxes are expensive, so I decided to design and build my own using the tools I have: my 3D printer and some basic materials.
This project uses 3D-printed brackets to create a lightweight but sturdy frame for a DIY softbox. The walls are made from simple cardboard, and the front diffuser is a basic white fabric which is fixed with thumbtacks to the cardboard.
I hope this helps other makers on a budget to elevate their product photography!
What You'll Need (BOM):
- 3D-Printed Parts:
- 1x "SoftboxMale.3mf"
- 1x “SoftboxFemale.3mf”
- 6x “Fixture 6x.3mf”
- Non-Printed Parts:
- Cardboard for the 4 side walls.
- A piece of white, translucent fabric (an old white t-shirt, a bedsheet, or baking parchment paper works well).
- Aluminum foil to line the inside walls.
- 6x Heated inserts for M3 screws, 6mm long
- Hot glue or strong tape to assemble everything.
- I bought this light from Aliexpress
