1 / 1
5 Way Filament HUB with sensor aka THE HUB
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its an easy printable 5 to 1 Filament HUB with sensor.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
I wanted a easy printable Filament HUB for my MMX to test it.
It prints without support with the wide area on the buildplate.
For the connection im using pc4-m6 fittings.
For the gate sensor it uses a OMRON Switch without the Lever and a 5mm ball.
Screw it in place with 2 2x20mm selftapping screws.
It also has a strain relieve for the sensor cable to mount with an ziptie.