AR15 Magwell Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and sturdy.
- Ocena
- 4,5 / 5
- Polubienia
- 38
- Pobrania
- 309
- Wydruki
- 1
- Wyświetlenia
- 1503
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple AR15 wall mount; no bells or whistles.
I wanted a simple yet sturdy mount that I could mount on a wall. All the ones I found either flapped around or tried to be something fancy. This mount fits and locks in the magwell just as a magazine would. So you do need to press the mag release when removing the rifle; keep that in mind when you're hanging it because it maybe facing the wall and possibly difficult to reach.
The simple version has larger screw holes (11.5mm instead of 9mm in the others) I was hoping for a more universal compatibility with #10 and 12 screws so measure your screw's head before printing. The screws I originally designed this for are #10 stainless steel and fits in the screw hole, and a few months later it is still holding tight on the back of my door.
It was printed on it's side with 7 walls and 20% infill; the weight of your rifle may warrant this being beefed up a bit. As a comparison mine is 7 lbs