Credit Card Paper Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects a piece of paper in your wallet so that you can write on it.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Tips:
I have tried many times to get the right XY hole compensation right, and I found that with my 0.4 nozzle, I needed 0.2mm XY hole compensation to get the paper to be able to fit in the slots while not being able to slide out. Let me and other people know if you have any better solutions.
If you have a smooth bed, you may want to print on that because it will help you not have bumps when you write or draw.
Assembly Instructions:
- Measure and cut out a piece of plain paper 8.5x5cm
- Place the paper in such a way that the edges near the corner are lined up with the 0 cm and the 0.5 cm marks on a ruler and draw a line along the edge of the ruler. Repeat for every corner.
- Cut the corners off. This will allow you to slide the paper in the shorter sides better.
- Slide the paper into the longer edges first. You my have to bend the paper a little.
- Sliding the paper along the length of the card, insert the paper into the slots on the shorter edges of the card.
- Do any minor adjustments and you are good to go!
It would mean a lot if you tried out the other Credit Card-Sized models that I made. Check out the collection here: https://www.printables.com/@The_Defect/collections/2477278