Uniterra Nomad - Replacement Reservoir Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cap for the Uniterra Nomad espresso machine
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 36
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement cap I created for another member of Espresso Aficionados who lost his cap. Thanks go to another owner of the Nomad who could give me measurements and I hope this model fits. I'll update this model based on feedback from other members.
Printed in PETG, horizontal surfaces were supported just enough by lower layers to not need supports in the slicer. The original cap is made of polypropylene and I imagine the tubing it mates with is also PP, or some form of polyethylene and should be flexible enough to mate well with the replacement cap. The reservoir is not pressurized (the cap is actually vented) so only needs to keep water from splashing out.
Models are provided as STEP and STL for editing and slicing, as well as the original Freecad project file. Ironing may be enabled if desired, but it is not required to produce a good final product. 15-20% gyroid infill made it feel solid in the hand.
Provided image is the original cap because I've already sent out the print.
EDIT: Downsized the rings based on feedback from the owner's fitment into the machine.