LayersFactory
Zgłoś model
1 / 2
Recurve Archery Bow ILF Limb Shims — zdjęcie 1
1 / 2

Recurve Archery Bow ILF Limb Shims

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

miiiikeb

miiiikeb

@miiiikeb_114121

Snap-in shims to quickly adjust the poundage of an ILF recurve (archery) bow.

Ocena
0 / 5
Polubienia
16
Pobrania
93
Wydruki
0
Wyświetlenia
635
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Sports
Licencja
Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (30)Powiązane

ILF Recurve Shims
Precision-fit shims for quickly adjusting limb pitch on ILF recurve bows—just like adding limb bolt turns, but without touching the bolts. These are great for training with a slightly heavier draw or quick re-tuning for different arrows / limbs on the same riser.

These work with all the Win&Win risers we've tried; hopefully, they're a good fit for other ILFs too. They come in multiple labelled thicknesses, making them quick to identify and swap.

I've done the STLs for ½ turn adjustments, but the SCAD file is easy to modify for any thickness you like—and the text label will change to match whatever turn-count you choose 😊.

I've never seen anything like these, and I'd really like to know what others think of them. If you make a set, please leave a comment / make and let me know your thoughts.

 

Features

Multiple thicknesses for easy tuning

Turn-count labels are shown on each shim

Snap-fit design—no tools, just pop it in and out

Print Info

  • Material: PLA or PETG
  • Multi-Material: Optional (for label text)
  • Layer height: 0.15 mm
  • Infill: 100%
  • Supports: None
  • Adhesion: No brim
  • Orientation: As shown

OpenSCAD Info

The set contains the following model files:

  • ‘noText(Body)’ - Unlabelled Shim
  • ‘withText(Body)’ - Shim with blockout for text. Use this on its own for an embossed label, maybe even with a manual colour change.
  • ‘withText(Text)’ - Text only, to suit the blockout in the previous model. 

Tip: if you're using both ‘withText’ files in a multi-material print, try to get the text to print before the shim for the first layer to give a clean edge to the text. In PrusaSlicer, this means getting ‘Text’ model above the ‘Body’ model in the object list (I think!). The examples in the photos didn't have this, that's why the text isn't so crisp.

This model uses the font ‘Osifont’, which is great for 3d printing. I haven't included it in the pack, but you can find it here. It needs to be installed on your OS as OpenSCAD doesn't import fonts directly. Have a look in the SCAD file for (Windows 11) installation instructions. I found getting it working was a bit tricky.

Source

Tagi

archeryrecurveilf