1 / 7
Banner/Exide battery fixator for Toyota vehicles — zdjęcie 1
1 / 7

Banner/Exide battery fixator for Toyota vehicles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ensure tight fitting for replacement Banner or Exide batteries with the factory arm

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Banner makes very good and durable replacement batteries for most car types, but their top is shaped a little differently from how the factory battery is in Toyota. There's a 13mm wide, and 22mm tall gap between the edges and the fixation corners of the factory arm (see the picture attached, marked with red arrows).

These spacers are dedicated to fill these gaps and fit the battery nice and tightly under the fixator arm. The corners on the arm are about 50mm long.

These fit our Toyota Verso made in 2016, for a Banner P 62 19 battery. Likely matches any Toyota with any compatible Banner battery (check Banner's website to find the correct replacement battery for your car). Exide batteries look the same shape, likely fits those too (not tested myself).

Print in PETG. Add extra strength with 4 wall loops and 35% infill density with rectilinear pattern.

Parametric files included for easy modification.