BEER CAN LABELING MACHINE v2.0 (STANDARD VERSION)

There is also an extended version that is 30mm wider that can handle label widths from 58mm up to 141,4mm if needed. If you do not need the extended version that is linked below (→need for more than 111,4mm wide label backing paper), I recommend to print the standard version on this page as it is a less challenging print.

https://www.printables.com/model/1348539-beer-can-labeling-machine-v20-extended-version-30m

UPDATE 20250707: Remix for this standard version now available with all available inserts in 1mm increments

Please see the attached .PDF for more detailed part and print instructions! Make sure to read carefully about the quantities required for each .stl and also which material it should be printed from (PLA, PETG or TPU)

This is a machine that will help you separate the label from the backing paper and automatically apply it onto your beer can. This model supports labels from rolls with a minimum width of 58mm and a maximum backing paper width of 111,4 mm. This is a somewhat challenging build as it consists of many parts, but a really fun one as it works far above my expectations.

See the attached video above for more detailed explanations on assembly…

The labels are fed through the machine and as you pull on the backing paper the label separates and will be automatically applied to the can - consistently, and dead straight.

There are at the start 4 different label width inserts included in the .STL package. The inserts are tailored for the exact width of the backing paper that you use. The insert is quick to print and can easily be switched out for another one by loosening 2 screws. The width options included from the start in this package are 78mm, 90mm, 105mm, 111,4mm. 

→ UPDATE 20250707: Remix for this standard version now available with all available inserts in 1mm increments

Also note the additional hardware need below: 

M8 threaded rod (127mm, 3pcs)

M8 threaded rod (200mm, 1pcs)

M8 Hex nut (1pcs)

M5 hex head bolt (20mm, 2pcs)

M5 heat inserts (2pcs)

Ball bearings (skateboard) , 608zz (22*7*8mm , 8pcs)

https://www.printables.com/model/1348539-beer-can-labeling-machine-v20-extended-version-30m

This project has taken many many hours and design iterations to complete, so I hope that all the “flaws” have been ironed out. I have run more than 600 cans through the machine and I am completely thrilled how well it works.

Having that said I am happy to receive ideas for improvements (trust me I'm already working on it as well, but it is very minor updates at this stage). Version 1 was never public but went out to about 20 testers with good feedback.

If you have read this far and consider to print one yourself, I wish you the best of luck and hope for you to get really good use out of it. 

Cheers, and happy printing and brewing :)