Activated Carbon Filter Box with magnetic lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small box to put on your drawer, refrigerator or any place to eliminate smell.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had had several time which rotten ingredients causing bad olour in my refrigerator then i usually bought an small carbon filter, but I thought Why dont make my own filter, that can be refilled any time?
EDIT July, 7 2025: Forget to mention, it uses 8 pcs 5x2mm magnets
So I designed this and sharing now after months using it myself.
I shared the 3mf file with my config for the Lid you need to change to your printer and profile.
This can be printed in any material you want, mine was printed in PLA 0.2 layer height
The lid was printed with a modifier solid (generic torus) with normal config and the center of lid without top/bottom layers and 4 perimeters
I shared the 3mf file with my config for the Lid you need to change to your printer and profile but if you want to do yourself can follow below pictures:
