Sovol SV08 R3Men SSR & Heatsink Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
R3Men Sovol SV08 graphite bed included SSR mount with the addition of a heatsink
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hello.
I recently got one of the R3Men graphite beds for my SV08 and wanted to fit the supplied SSR to a heatsink, so I made one from aluminium angle for my printer, but was then asked if I could make a 3D printed design of it instead and here it is.
It is currently untested, as my machine is using the one I fabricated, so if you do thry this out please do give me feedback on if it works or even if I can make any improvements to it.
Two photos show my current aluminium bracket to give you a reference of where this bracket can go.
You will need two M5 bolts & nuts to secure the heatsink to the bracket and two M3 X 25/30 mm bolts to secure the bracket to the 20x20mm frame extrusion once you've drilled and tapped two holes in it.
Cheers.
Ian Contessa