Meshtastic Harbor Breeze mounting bracket - improved rotation control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the solar panel module without having to drill the case. Rotation is controlled.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Used to turn the Harbor Breeze LED garden light solar panel into a Meshtastic solar powered node.
This mounting arm allows you to use the original case without any modification. The antenna is held vertically by the arm no matter what angle you choose for the solar panel.
When printing these models, the rotation block should be positioned with the “teeth” up.
Note that to use the rotation control block you have to print the arm file in this model as there is a mating feature. Note that when you assemble this you need to fit the two pieces together.
The rotation block can be glued to the arm, or you can just compression hold it when you tighten the pivot bolt. I think it depends on whether you plan to adjust the solar panel angle often. If you are just doing it once or twice, then there's really no need to glue it.