Scale Model Ship Waterline Scribe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scribe to mark waterlines on model ships and boats.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this scribe to mark waterlines on the hull of a model ship or boat. Clearly, it can be used for other purposes where an adjustable-height scribe is needed.
The arm has a hole/slot for a 5/64 (2mm) lead or blade; I found these among the spare parts for compasses at the local art store. The base, arm, and nut have an M5x0.8 thread. I used a 100mm threaded steel rod in the photos; I found a nylon or printed PLA rod is too flexible.
The base is hollow as I thought I might want to add some weight to the base, but I haven't yet needed to do so.
I printed the parts in PLA at 0.2mm structural with default slicer settings. No supports are needed with proper part orientation.