Ripcord Spinning Top (spin time up to 7 min)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pullcord spinning top. Designed modularly, the rings and tips can be chosen on how you want to assemble it.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pullcord spinning top. Designed modularly, the rings and tips can be chosen on how you want to assemble it. I recommend printing the rings with 100% infill. You can ask me any questions or ask for recommendations in assembly. I'm not stating which one it was immediately so that you can experiment and figure it out, but a certain combination I made managed to get me a spin of 7 minutes.
To spin the top, attach the top part of the top to the ring, attach whichever tip you want, then insert the top into the housing. Next, insert the pullcord into the housing; you will see that when doing this, the top will start rotating. Once the pullcord is fully inserted, hold on to the housing with the top facing the ground and pull out the pullcord for the top to fall out and stand on the ground, spinning. The faster you pull out the pullcord, the faster the top will spin