1 / 6
4 per day dovetail pill organizer with snap-on lid (print-in-place)/ 4 pro Tag Schwalbenschwanz-Pillen-Organizer mit Schnappdeckel (Print-in-Place) — zdjęcie 1
1 / 6

4 per day dovetail pill organizer with snap-on lid (print-in-place)/ 4 pro Tag Schwalbenschwanz-Pillen-Organizer mit Schnappdeckel (Print-in-Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plug-in pill case for modular use/ Steckbares Pillenetui für den modularen Einsatz

Ocena
2 / 5
Polubienia
31
Pobrania
114
Wydruki
0
Wyświetlenia
753
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ich bin von dem Modell „N-Day Dovetail Pill Organizer with Print-in-Place Snap Lid” von Jerrod H. begeistert. Ihm gebührt aller Dank.

Da ich eine Tablettenbox mit vier Fächern benötige, aus der sich die Tabletten sehr einfach entnehmen lassen, habe ich diesen Remix erstellt. Jedes Fach (15 x 15 x 15 mm) kann herausgenommen werden und hat einen entsprechenden kleinen Rand innen, der das Greifen erleichtert. Die Hauptabmessungen sind auf einem Screenshot zu sehen. Ich habe im Bereich des Schnappverschlusses mit Support gedruckt. Meine Einstellungen dazu sind ebenfalls auf den Bildern zu sehen.

Nach dem Druck fasst man die Box sehr nah am Gelenk an und bewegt den Deckel vorsichtig. Das Gelenk wird dann losbrechen und nach einigen Bewegungen ist es gut gängig. Zum Verschließen den Deckel etwa in der Mitte drücken, dann schnappt er ein.

 

Translation: DeepL

I am delighted with the model “N-Day Dovetail Pill Organizer with Print-in-Place Snap Lid” by Jerrod H.. He deserves all the thanks.

Since I need a pill box with four compartments from which the pills can be removed very easily, I created this remix. Each compartment (15 x 15 x 15 mm) can be removed and has a corresponding small edge on the inside to make it easier to grip. The main dimensions can be seen on a screenshot. I have printed with support in the area of the snap closure. You can also see my settings for this in the pictures.

After printing, hold the box very close to the joint and move the lid carefully. The joint will then break loose and after a few movements it is easy to move. To close the lid, press it approximately in the middle and it will snap into place.

Tagi