"Ride of the Hollow" - Halloween Headless Horseman Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Headless Horseman charges beneath the harvest moon, jack-o'-lantern in hand, galloping through legend and fear alike
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 197
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
Ride of the Hollow is a layered Hueforge art piece print capturing the chilling legend of the Headless Horseman. With bold, vintage-inspired linework and a dramatic orange-and-black palette, this haunting figure rides through a shadowy pine forest under a massive full moon. His flowing cape and raised pumpkin head bring a sense of eerie motion and classic Halloween lore to life. Perfect for any spooky decorative shelf, haunted mantle, or fall tabletop display, this piece evokes timeless folklore with graphic charm and dimensional depth.
Project: Headless Horseman 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x199.95mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Kexcelled Orange Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Sunlu Meta White Transmission Distance: 8
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Orange
At layer #17 (1.44mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.
Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.
One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:
![]() | ![]()
If you have more than one AMS or are manually changing filaments, |

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!
🎃 Halloween Hueforge: Witching Hour Whimsy 🎃
Want to sell your physical prints of this model? A commercial license is available through my profile.
This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.

