AWA 6AQ5 Transmitter / Ameco AC-1 Plug-in Coil Form
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1.25 diameter x 2.25" tall plug in coil form designed to take an octal plug base.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a plug in coil form that I designed for the AWA 6AQ5 transmitter. It also is the same size form that is used on the Ameco AC-1. It is 1.25" in diameter and 2.25" tall. I printed it out of clear PETG filament.
It uses octal tube socket plugs, which I found at Antique Electronic Supply (see link below).
I wound the coils as follows, all with 20 awg enameled wire. See link below:
80m - 30.5 turns - 22.3 uH measured
40m - 16.5 turns - 9.3uH measured
20m - 6.5 turns - 2.2uH measured
https://www.tubesandmore.com/products/plug-8-pin-octal-tube-base-black-plastic
https://www.antiquewireless.org/homepage/pcb-item-12/
https://www.amazon.com/dp/B07DYG6DVP